Posts tagged with "solar-panel" - page 2
-
Solar Panel Project Update - Part 1
It has been a while since I gave any updates on my solar panel project so I thought I should write a post on it. This can get pretty technical so if you are not into electronics or software, you can skip. Since I last reported about my design I’ve made a few changes mainly to increase the stability of the system. What happened was that in the long run, I found some problems that rear their head sometimes intermittently. As a result I had to change the design to recover some components from their weird state. In addition I reduced the variability of readings by the sensors.
...continue reading -
Savings Due To Solar Panel
Last year, around this time, I wrote a post on how much money my solar panel was saving us. I was supposed to write a follow up to it after one year, but I completely forgot about it. Thankfully, a reader reminded me to give an update and here I am. Unfortunately even after one year I still did not finish the software that was supposed to instantly tell me how much I am saving each month. I should be able to get that information because I have a bunch of sensors monitoring my solar panel system. They measure the power generated by the panel, the amount of power we are using at home and how much power we are drawing from grid. All that data is stored in the cloud in Firebase. Yet I did not finish that part of the software. And to think I am actually retired. Wonder where all my free time goes. Anyway, in this post I will give a guesstimate using our electricity bills as a proxy.
...continue reading -
Tools I Use To Repair Electronics
This is a continuation of my previous post on the tools that I have at my disposal when I am building electornic projects. As I mentioned before, this is not the comprehensive list of tools, but it should give you an idea. In the last post I left off at my soldering station. I use a couple of solder tips depending on the work. If I am soldering thick wires or soldering pins to an arduino nano board, I will use a chisel tip because it spreads heat well and makes good fat solder joint. For delicate work I use a thinner conical tip. Other than that I don’t use any other tips.
...continue reading -
Solar Panel Output Under Various Conditions
In a previous post I talked about how my sensors tell a story regarding our power usage. There are still many more stories that the sensors can tell us about how we use electricity and how much solar power is being generated. Have you ever wondered how the solar power output looks like during the course of a day? Let me give you a hint – it almost looks like a half-rectified sine wave. It was a really interesting discovery. How about the output of solar panel when the day is cloudy? I have answers to all these questions and more in this post.But first let me walk you through the whole setup that I have at home.
...continue reading -
Sensors Tell A Story
After having set up my solar panel, I installed a bunch of voltage and current sensors in various places to collect data about my power usage and also to keep track of how much solar energy is being generated. The plan was to optimize and maximize solar power usage. I want to eke out every bit of power from the panel and optimize the hell out of solar energy. I also wanted to build some visual artifacts (graphs) out of the data. If you are like me, crazy about data, and data analysis, then this post is for you.
...continue reading -
Follow-up to Virtual Meetup #7
Thank you to everyone who joined the virtual meetup #7. We had a very low turn-up but we certainly had a lot of questions. This post is a follow-up to that meeting so you know what we discussed. As it usually happens, the topics we covered varied quite a bit from investment related things to solar panels to taxes.
...continue reading -
How Much Money Did My Solar Panels Save?
It has been more than 6 month since I installed my lone 320W solar panel. So I wanted to check if it was doing me any favors and how much money is it saving. Normally one should wait for a full year to make any kind of useful analysis. But I get easily excited when it comes to doing any kind of data analysis and here I am at it again. It is a very small installation and hence the savings aren’t huge, but at least I am able to verify my predicted numbers (units of electricity) against the real numbers. Did I have any savings or was this whole solar panel project a waste of my time and money. Let’s find out.
...continue reading -
Getting The Most Out Of Solar Panels
It’s been a while since I updated you on my solar panel project. I thought I should continue where I left off. So after collecting all the data from my solar panels, batteries, grid and load, I observed something interesting. While the SMU was disconnecting the grid so that the load can run on batteries and solar energy, we are not fully utilizing the solar energy. During a perfectly clear day, the solar panel is generating more power than we can use during the day. The excess energy is just getting wasted. Can we do something about it?
...continue reading -
Follow-up to Virtual Meetup #6
Thank you to everyone who joined virtual meetup #6. As usual, we had some lively discussions. This post is a follow-up to that meeting to answer any questions that I could not answer at the time. So here goes –
...continue reading -
Collecting Data From Solar Panel Setup
After having setup the solar panel on our terrace, I wanted some data. Specifically I wanted to know the panel output over the course of the day and how much energy savings we are enjoying. The solar management unit (SMU) gives some details about the instantaneous power output and energy savings. But for some reason I felt the numbers look a bit too optimistic. Moreover I could not get more granular data from it. I guess it has more to do with not invented here syndrome. Either way I decided to hook up some sensors myself to gather all the data I'd like from it.
...continue reading