Building a DIY 5.1 Audio Video Receiver – Part 2

If you did not read part 1 of building a DIY 5.1 AVR, I suggest you start from there. Here is some important points from my previous post — decided to go with a class D amplifier start with a 2-channel amplifier for front speakers the front speakers are rated at 130W and 6 ohms After searching through a lot of class D amplifier chips, I finally decided to go with TDA7498. They are rated for 100W at 6 ohms and that should be sufficient. Although I have the 130W speakers, I never really ran them at full power, so … Continue reading “Building a DIY 5.1 Audio Video Receiver – Part 2”